Dell C9000 series, Reference Manual

Page: 1236 / 2286

Version Description
6.4.1.0 Introduced
Usage Information The following describes the
show tcp statistics cp
command shown in the
following example.
Field Description
Rcvd: Displays the number and types of TCP packets received by the
switch.
• Total = total packets received
• no port = number of packets received with no designated
port
0 checksum
error... Displays the number of packets received with the following:
• checksum errors
• bad offset to data
• too short
329 packets... Displays the number of packets and bytes received in sequence.
17 dup... Displays the number of duplicate packets and bytes received.
0 partially... Displays the number of partially duplicated packets and bytes
received.
7 out-of-order... Displays the number of packets and bytes received out of order.
0 packets with
data after window Displays the number of packets and bytes received that exceed
the switch’s window size.
0 packets after
close Displays the number of packet received after the TCP
connection was closed.
0 window probe
packets... Displays the number of window probe and update packets
received.
41 dup ack... Displays the number of duplicate acknowledgement packets
and acknowledgement packets with data received.
10184 ack... Displays the number of acknowledgement packets and bytes
received.
Sent: Displays the total number of TCP packets sent and the number
of urgent packets sent.
25 control
packets... Displays the number of control packets sent and the number
retransmitted.
11603 data
packets... Displays the number of data packets sent.
24 data packets
retransmitted Displays the number of data packets resent.
IPv4 Routing 1236