Dell C9000 series, Reference Manual

Page: 1897 / 2286

Version Description
7.6.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information RIP supports a maximum of 16 ECMP paths.
neighbor
Define a neighbor router with which to exchange RIP information.
C9000 Series
Syntax
neighbor ip-address
To delete a neighbor setting, use the
no neighbor ip-address
command.
Parameters
ip-address Enter the IP address, in dotted decimal format, of a router with
which to exchange information.
Defaults Not configured.
Command Modes ROUTER RIP
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Routing Information Protocol (RIP) 1897