Dell C9000 series, Reference Manual

Page: 2237 / 2286

password Enter a character string up to eight characters long as a
password. If you do not enter an encryption-type, the password
is stored as clear text.
Defaults Not configured.
Command Modes VRRP
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information The given password is encrypted by the system and the
show config
displays an
encrypted text string for any of the encrypted typed used.
clear counters vrrp
Clear the counters maintained on VRRP operations.
C9000 Series
Syntax
clear counters vrrp [ vrrp-id ] [ipv6][vrf vrf-name ]
Parameters
vrrp-id (OPTIONAL) Enter the number of the VRRP group ID. The range
is from 1 to 255.
ipv6 (OPTIONAL) Enter the keyword
ipv6
to clear counters from the
IPv6 VRRP group.
vrf vrf-name (OPTIONAL) Enter the keyword
vrf
and then the name of the
VRF to clear counters that are maintained on the VRRP
operations corresponding to that VRF.
Virtual Router Redundancy Protocol (VRRP) 2237