Dell C9000 series, Reference Manual

Page: 2074 / 2286

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.4.1.0 Added support for IPv6.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Usage Information Multiple logging servers of both IPv4 and/or IPv6 can be configured.
Related
Commands
logging on — enables the logging asynchronously to logging buffer, console, Syslog
server, and terminal lines.
logging trap — enables logging to the Syslog server based on severity.
logging buffered
Enable logging and specify which messages are logged to an internal buffer. By default, all messages are
logged to the internal buffer.
C9000 Series
Syntax
logging buffered [ level ] [ size ]
To return to the default values, use the
default logging buffered
command.
To disable logging stored to an internal buffer, use the
no logging buffered
command.
Parameters
level (OPTIONAL) Indicate a value from 0 to 7 or enter one of the
following equivalent words:
emergencies
,
alerts
,
critical
,
errors
,
warnings
,
notifications
,
informational
, or
debugging
. The default is 7 or debugging .
size (OPTIONAL) Indicate the size, in bytes, of the logging buffer. The
number of messages buffered depends on the size of each
message. The range is from 40960 to 524288. The default is
40960 bytes .
Defaults level = 7 ; size = 40960 bytes
Command Modes CONFIGURATION
Simple Network Management Protocol (SNMP) and Syslog 2074