Dell C9000 series, Reference Manual

Page: 115 / 2286

Command Modes EXEC
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.5.1.0 Introduced on the E-Series.
Usage Information Messages can contain an unlimited number of lines; however, each line is limited to
255 characters. To move to the next line, use
<CR>
. To send the message use
CTR-Z
;
to abort a message, use
CTR-C
.
service timestamps
To debug and log messages, add time stamps. This command adds either the uptime or the current time and
date.
C9000 Series
Syntax
service timestamps [debug | log] [datetime [localtime] [msec]
[show-timezone] | uptime]
To disable timestamping, use the
no service timestamps [debug | log]
command.
Parameters
debug (OPTIONAL) Enter the keyword
debug
to add timestamps to
debug messages.
log (OPTIONAL) Enter the keyword
log
to add timestamps to log
messages with severity from 0 to 6.
Control and Monitoring 115