manualshive.com logo in svg

Dell C9000 series, Reference Manual

Share
Download
Dell C9000 series Reference Manual Download Page 1450

reachable-time

Enable the verification of the configured reachability time in the received RA packets.

C9000 Series

Syntax

reachable—time 

value

To reset the advertised reachability time, use the 

no reachable-time

value 

command.

Parameters

value

Enter the advertised reachability time in milliseconds. The range 
is from 0 to 3,600,000 milliseconds.

Defaults

none

Command Modes

CONFIGURATION

CONFIGURATION TERMINAL BATCH

Command History This guide is platform-specific. For command information about other platforms, refer 

to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.10(0.0)

Introduced the Configuration Terminal Batch mode on C9010.

9.9(0.0)

Introduced on the C9010.

9.7(0.0)

Introduced on the S6000-ON.

9.7(0.0)

Introduced on the S4810, S4820T, S5000, S6000, and Z9000 
switches.

Neighbor Discovery Protocol (NDP)

1450

Summary of Contents for C9000 series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands