Dell C9000 series, Reference Manual

Page: 1756 / 2286

consumption by the powered device. Power negotiation via LLDP is not supported in
static
mode.
Use this command in Configuration Terminal Batch mode to manage inline power
supply in a dual-homing setup.
The following examples show power management mode, “class” configured for the
port extender 255.
Example
Dell(conf)#power inline mode pe 0 stack-unit 0 static
Dell#show power inline pe 0 stack-unit 0
Global inline power Threshold : 99
Power Reserved for inline Power: 841W
Total Inline Power Consumed: 0W
Remaining inline power Available: 841W
Power Management Mode: Static
Interface Inline Power Inline Power Class Device
PoE Port LLDP
Max / Alloc Consumed Type
Priority Support
(Watts) (Watts)
------------- ------------ ------------ ------- ------
-------- ------
PeGi 0/0/0 30.00/0.00 0.00 NO_PD -
low 0
power inline restore pe
Enable the temporarily suspended PoE power supply to all the ports in a port extender unit.
C9000 Series
Syntax
power inline restore pe pe-id stack-unit unit number
Parameters
pe pe-id Enter the keyword
pe
and the port extender ID. Range is from 0
to 255.
stack-unit unit
number
Enter the keyword
stack-unit
and the stack-unit number.
Range is from 0 to 7.
Defaults None
Command Modes EXEC
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
Port Extenders (PE) 1756