Dell C9000 series, Reference Manual

Page: 353 / 2286

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information Sequence numbers for this filter are automatically assigned starting at sequence
number 5.
If you do not use the
ge
or
le
options, only packets with an exact match to the prefix
are filtered.
Related
Commands
permit — configures a filter to pass packets.
seq — configures a drop or permit filter with a specified sequence number.
ip prefix-list
Enter the PREFIX-LIST mode and configure a prefix list.
C9000 Series
Syntax
ip prefix-list prefix-name
To delete a prefix list, use the
no ip prefix-list prefix-name
command.
Parameters
prefix-name Enter a string up to 16 characters long as the name of the prefix
list, up to 140 characters long.
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
Access Control Lists (ACL) 353