Dell C9000 series, Reference Manual

Page: 884 / 2286

clear frrp
Clear the FRRP statistics counters.
C9000 Series
Syntax
clear frrp [ ring-id ]
Parameters
ring-id (Optional) Enter the ring identification number. The range is
from 1 to 255.
Defaults none
Command Modes EXEC
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series.
7.5.1.0 Introduced.
Usage Information Executing this command without the optional
ring-id
command clears the statistics
counters on all the available rings. The system requires a command line confirmation
before the command executes. This command clears the following counters:
• hello Rx and Tx counters
• Topology change Rx and Tx counters
• The number of state change counters
Example
Dell# clear frrp
Clear frrp statistics counter on all ring [confirm] yes
Dell#clear frrp 4
Force10 OS Resilient Ring Protocol (FRRP) 884