Dell C9000 series, Reference Manual

Page: 1526 / 2286

show config
Display the non-default values in the current OSPF configuration.
C9000 Series
Syntax
show config
Command Modes ROUTER OSPF
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Example
Dell(conf-router_ospf)#show config
!
router ospf 3
passive-interface FastEthernet 0/1
Dell(conf-router_ospf)#
show ip ospf
Display information on the OSPF process configured on the switch.
C9000 Series
Syntax
show ip ospf process-id [vrf vrf name ]
Open Shortest Path First (OSPFv2 and OSPFv3) 1526