Dell C9000 series, Reference Manual

Page: 2274 / 2286

maximum dynamic-routes
Specify the maximum number of dynamic (protocol) routes a VRF can have.
C9000 Series
Syntax
maximum dynamic-routes limit {
warn-threshold
threshold-value |
warning-only
}
To remove the limit on the maximum number of routes used, use the
no maximum
dynamic-routes
command.
Parameters
limit Maximum number of routes allowed in a VRF. Valid range is
from 1 to 16,000 (or maximum allowable for that platform if
smaller value).
warning-
threshold Warning threshold value is expressed as a percentage of the limit
value. When the number of routes reaches the specified
percentage of the limit, a warning message is generated. Valid
range is 1 to 100. When warn-threshold is used, once the limit is
reached, additional dynamic routes will not be allowed.
warning-only When the warning-only option is used, a syslog message will be
thrown when maximum number of dynamic routes reaches the
limit. Additional dynamic routes will still allowed.
Defaults No limit is set on the maximum number of dynamic routes for a VRF.
Command Modes CONFIGURATION-VRF
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OSCommand Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.4(0.0) Introduced on the S–Series.
Virtual Routing and Forwarding (VRF) 2274