Dell C9000 series, Reference Manual

Page: 2038 / 2286

• For the Management interface on the stack-unit, enter the
keyword
ManagementEthernet
then the slot/port
information.
• For a port channel interface, enter the keywords
port-
channel
then a number.
• For a 100/1000 Ethernet interface, enter the keyword
GigabitEthernet
then the slot/port information.
• For a port extender Gigabit Ethernet interface, enter the
keyword
peGigE
then the pe-id / stack-unit / port-id
information. The pe-id range is from 0 to 255; the stack-
unit unit-number range is from 0 to 7; and the port-id
range is from 1 to 48.
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on S-Series Stacking.
8.1.1.0 Introduced on the E-Series ExaScale.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information The dropEvent counter (sFlow samples dropped due to sub-sampling) shown in the
following example always displays a value of zero.
Example
sFlow 2038