Dell C9000 series, Reference Manual

Page: 875 / 2286

-p port-number (OPTIONAL) Enter the keyword
—p
then the port number.
The range is 1 to 65536
The default is 22
-v {1|2} (OPTIONAL) Enter the keyword
—v
then the SSH version 1 or 2.
The default: The version from the protocol negotiation.
NOTE: If the FIPS mode is enabled, this option does not
display in the output.
Defaults As indicated above.
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Removed the support for hmac-sha2-256-96 algorithm.
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.1(0.0) Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Related
Commands
ip ssh server Configure an SSH server.
show ip ssh
client-pub-keys Display the client-public keys.
Usage Information Both inbound and outbound SSH sessions using IPv4 or IPv6 addressing are supported.
Inbound SSH supports accessing the system through the management interface as well
as through a physical Layer 3 interface.
NOTE: Some of the parameters in this command require licensing to access. For
more information, contact your Dell Networking representative.
Example
If FIPS mode is not enabled:
Dell#ssh 10.11.8.12 ?
-c Encryption cipher to use (for v2 clients
only)
-l User name option
-m HMAC algorithm to use (for v2 clients
only)
FIPS Cryptography 875