Dell C9000 series, Reference Manual

Page: 293 / 2286

monitor (OPTIONAL) Enter the keyword
monitor
when the rule is
describing the traffic that you want to monitor and the ACL in
which you are creating the rule is applied to the monitored
interface. For more information, refer to the “Flow-based
Monitoring” section in the Port Monitoring chapter of the
Dell
Networking OS Configuration Guide .
fragments Enter the keyword
fragments
to use ACLs to control packet
fragments.
Defaults Not configured.
Command Modes CONFIGURATION-EXTENDED-ACCESS-LIST
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Added the keyword
dscp
.
8.2.1.0 Allows ACL control of fragmented packets for IP (Layer 3) ACLs.
8.1.1.0 Introduced on the E-Series ExaScale.
6.5.1.0 Expanded to include the optional QoS
order
priority for the
ACL entry.
Usage Information Use the
order
option only when you use policy-based QoS on the switch. For more
information, refer to the Quality of Service chapter of the C9000 Series Configuration
Guide .
When you use the
log
option, the CP processor logs detail the packets that match.
Depending on how many packets match the log entry and at what rate, the CP may
become busy as it has to log these packets’ details.
Use the
monitor
option only when you are using flow-based monitoring. For more
information, refer to the Port Monitoring chapter of the C9000 Series Configuration
Guide .
NOTE: When ACL logging and byte counters are configured simultaneously, byte
counters may display an incorrect value. Configure packet counters with logging
instead.
Access Control Lists (ACL) 293