4828 Ne 12th Avenue, Oakland Park, Florida 33334-4804 • 1.954.928.1310 • [email protected]
Quick Tips
1. Allow for the MBR system to be turned on for at least
30 secs before plugging any sources into it.
2. Initial setup should be done with a Laptop.
3. Hover over or click on the for brief explanations.
4. Only use the 12V 1A power supply provided
5. 550 ONLY - Cell antennas MUST be connected to the
unit in order for the system to authenticate the SIM.
6. When using mobile devices make sure that
‘autocorrect’ does not change sensitive information
that you are typing in. Ex. “APN ”.
HOW TO CONNECT:
1. Connect to your MBR system
(Blue Port)
with the ethernet cable provided for initial connection and troubleshooting purposes.
2. Open a supported browser such as Mozilla Firefox or Google Chrome.
3. In the URL at the top of the browser type in the IP address “192.168.101.1”
4. This should open the “Router Status” page from here you can see the different ports and their connections.
USER ACCESS MANAGEMENT
(BE SURE TO READ ALL NOTES ON THIS PAGE)
:
Connected Users - Choose your settings based on security needs and parameters.
•
Allow open Internet access (no login required)
- No restricting data usage to any devices on the network.
•
Allow Internet access with agreement to disclaimer
- All devices that connect to the system must agree to terms before usage.
•
Allow Internet access using login codes and MAC authentication
- Restricting data usage based on login codes and MAC authentications previously set up.
•
Allow Internet access using MAC authentication only
- Restricting access to allowed MAC IDs only
Note: If you choose either options “B or C,” it is recommended that you instruct all users to navigate to
http://signon.internet to access the disclaimer or login page in order to successfully log in to access the internet.
You can also
BLOCK
or
WHITELIST
devices. Whitelisting a device means that no matter how you set the users it will always be allowed onto the network and will not have to
go through the disclaimer process. Blocking on this page is only temporary. To fully block an address do so on the MAC MANAGEMENT page.
Login Codes - Codes given to users in order for their devices to connect and gain internet access.
•
Login Code
- Does not have to be a numerical value
•
Description
- Our suggestion is to put the name of the user and the device or the name of the crew / group who will be using the code.
•
Download/Upload Rate
- The highest restriction allowable is 75Mbps or MAX
Ethernet Ports
MBR 500/550 ethernet ports count from
right to left beginning with the blue port.
Main LAN
Wave WiFi
Cellular
VSAT
2.4G
Cellular
SIM Card
USB
Access Point
Standard SIM
Orientation
THIS SIDE UP
WHEN INSERTING SIM
Guest
Accessories
Power Adapter
Ethernet Patch Cable
x2 AP antennas
x2 Cell Antennas
(550 ONLY)
MBR Series 500/550
Quick Start Guide