Dell C9000 series, Reference Manual

Page: 1353 / 2286

lacp port-priority
To influence which ports will be put in Standby mode when there is a hardware limitation that prevents all
compatible ports from aggregating, configure the port priority.
C9000 Series
Syntax
lacp port-priority priority-value
To return to the default setting, use the
no lacp port-priority priority-value
command.
Parameters
priority-value Enter the port-priority value. The higher the value number, the
lower the priority. The range is from 1 to 65535. The default is
32768 .
Defaults 32768
Command Modes INTERFACE
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Link Aggregation Control Protocol (LACP) 1353