Dell C9000 series, Reference Manual

Page: 1025 / 2286

Example
Dell(conf-if-po-1)# show config
!
interface Port-channel 1
no ip address
shutdown
Dell(conf-if-po-1)#
show interfaces port-channel
Display information on configured Port Channel groups.
C9000 Series
Syntax
show interfaces port-channel [ channel-number ] [brief]
Parameters
channel-number For a Port Channel interface, enter the keyword
port-channel
then a number. The range is from 1 to 128.
brief (OPTIONAL) Enter the keyword
brief
to display only the port
channel number, the state of the port channel, and the number
of interfaces in the port channel.
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series. Modified to display the LAG failover
group status.
7.5.1.0 Introduced on the C-Series.
Interfaces 1025