Dell C9000 series, Reference Manual

Page: 601 / 2286

neighbor distribute-list
Distribute BGP information via an established prefix list.
C9000 Series
Syntax
neighbor { ipv6-address | peer-group-name } distribute-list prefix-
list-name {in | out}
To delete a neighbor distribution list, use the
no neighbor { ipv6-address |
peer-group-name } distribute-list prefix-list-name {in | out}
command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group-name Enter the name of the peer group.
prefix-list-name Enter the name of an established prefix list. If you do not
configure the prefix list, the default is
permit
(to allow all
routes).
in Enter the keyword
in
to distribute only inbound traffic.
out Enter the keyword
out
to distribute only outbound traffic.
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage Information Other BGP filtering commands include the
neighbor filter-list
and
neighbor
route-map
commands.
Related
Commands
• neighbor filter-list – assigns a AS-PATH list to a neighbor or peer group.
• neighbor route-map – assigns a route map to a neighbor or peer group.
Border Gateway Protocol 601