Dell C9000 series, Reference Manual

Page: 2085 / 2286

Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Usage Information When you enable
logging synchronous
, unsolicited messages appear between
software prompts and outputs. Only the messages with a severity at or below the set
level are sent to the console.
If the message queue limit is reached on a terminal line and messages are discarded, a
system message appears on that terminal line. Messages may continue to appear on
other terminal lines.
Related
Commands
logging on — enables logging.
logging trap
Specify which messages are logged to the Syslog server based the message severity.
C9000 Series
Syntax
logging trap [ level ]
To return to the default values, use the
default logging trap
command.
To disable logging, use the
no logging trap
command.
Parameters
level Indicate a value from 0 to 7 or enter one of the following
parameters:
emergencies
,
alerts
,
critical
,
errors
,
warnings
,
notifications
,
informational
, or
debugging
.
The default is 6 or informational .
Defaults 6 or informational
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Simple Network Management Protocol (SNMP) and Syslog 2085