Dell C9000 series, Reference Manual

Page: 2082 / 2286

Version Description
7.5.1.0 Introduced on the C-Series.
Related
Commands
default logging monitor — returns the logging monitor parameters to the default
setting.
logging on
Specify that debug or error messages are asynchronously logged to multiple destinations, such as the logging
buffer, Syslog server, or terminal lines.
C9000 Series
Syntax
logging on
To disable logging to logging buffer, Syslog server and terminal lines, use the
no
logging on
command.
Defaults Enabled.
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Usage Information When you use the
no logging on
command, messages are logged only to the
console.
Related
Commands
logging — enables logging to the Syslog server.
logging buffered — sets the logging buffered parameters.
logging console — sets the logging console parameters.
Simple Network Management Protocol (SNMP) and Syslog 2082