Dell C9000 series, Reference Manual

Page: 1758 / 2286

upgrade poe-controller
Manually upgrade the PoE controller firmware for a specified port extender unit.
C9000 Series
Syntax
upgrade poe-controller pe pe-id stack-unit unit number
Parameters
pe pe-id Enter the keyword
pe
and port extender ID. Range is from 0 to
255.
stack-unit unit
number
Enter the keyword
stack-unit
and the unit number. Range is
from 0 to 7.
Defaults None
Command Modes EXEC
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage Information The
upgrade poe-controller pe
command is used to manually upgrade the PoE
controller firmware for a specified port extender unit.
You can upgrade the PoE controller firmware using the firmware image that is packed
with the Dell Networking OS. Once the upgrade is successful, the Port Extender reloads
automatically.
Example
Dell#upgrade poe-controller pe 254 stack-unit 1
show power inline
Display the PoE power allocation on a specified port extender.
C9000 Series
Syntax
show power inline {pe pe-id stack-unit unit number | interface
interface }
Port Extenders (PE) 1758