Dell C9000 series, Reference Manual

Page: 1441 / 2286

clear ipv6 neighbors
Delete all entries in the IPv6 neighbor discovery cache or neighbors of a specific interface. Static entries are
not removed using this command.
C9000 Series
Syntax
clear ipv6 neighbors [ ipv6 address ] | interface interface | vrf
vrf name ]
Parameters
ipv6-address Enter the IPv6 address of the neighbor in the x:x:x:x::x format to
remove a specific IPv6 neighbor.
NOTE: The :: notation specifies successive hexadecimal
fields of zero.
vrf vrf-name (OPTIONAL) Enter the keyword
vrf
followed by the name of the
VRF to clear the neighbor corresponding to that VRF.
NOTE: If you do not specify this option, the neighbors in
the default VRF are cleared.
interface interface To remove all neighbor entries learned on a specific interface,
enter the keyword
interface
then the interface type and slot/
port or number information of the interface:
Enter one of the following keywords with slot/port or number to
clear information about the IPv6 neighbors learned on the
specified interface:
• For a 1–Gigabit Ethernet interface, enter the keyword
GigabitEthernet
then the slot/port information
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a port-channel interface, enter the keyword
port-
channel
with a port-channel number. The range of port-
channel numbers is from 1 to 4096.
• For a VLAN interface, enter the keyword
vlan
then a
number from 1 to 4094.
• For a tunnel interface, enter the keyword
tunnel
.
Command Modes
• EXEC Privilege
Neighbor Discovery Protocol (NDP) 1441