Dell C9000 series, Reference Manual

Page: 1556 / 2286

show ip ospf statistics
Display OSPF statistics.
C9000 Series
Syntax
show ip ospf [ process-id | vrf vrf-name ] statistics global |
[interface name {neighbor router-id }]
Parameters
process-id Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first OSPF
process.
vrf vrf-name Enter the keyword
vrf
and the name of the VRF to display
statistics corresponding to the OSPF process that is tied to a
specific VRF.
global Enter the keyword
global
to display the packet counts received
on all running OSPF interfaces and packet counts OSPF
neighbors receive and transmit.
interface name
(OPTIONAL) Enter the keyword
interface
then one of the
following interface keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a Loopback interface, enter the keyword
loopback
then a number from 0 to 16383.
• For a Null interface, enter the keywords
null 0
.
• For a Port Channel interface, enter the keywords
port-
channel
then a number.
• For a tunnel interface, enter the keyword
tunnel
then the
tunnel ID. The range is from 1 to 16383.
• For a VLAN interface, enter the keyword
vlan
then a
number from 1 to 4094.
neighbor router-
id
(OPTIONAL) Enter the keyword
neighbor
then the neighbor’s
router-id in dotted decimal format (A.B.C.D.).
Defaults none
Command Modes
• EXEC
Open Shortest Path First (OSPFv2 and OSPFv3) 1556