Dell C9000 series, Reference Manual

Page: 1029 / 2286

Example (port-
range)
Dell#show interfaces port-channel 1-2 brief
Codes: L - LACP Port-channel
O - OpenFlow Controller Port-channel
A - Auto Port-channel
I - Internally Lagged
LAG Mode Status Uptime Ports
1 L3 down 00:00:00 Te 11/1 (Down)
Related
Commands
show lacp — displays the LACP matrix.
show port-channel-flow
Display an egress port in a given port-channel flow.
C9000 Series
Syntax
show port-channel-flow outgoing-port-channel number incoming-
interface interface {source-ip address destination-ip address } |
{source-port number destination-port number } | {src-mac address
dest-mac address {vlan vlanid | ether-type}}
Parameters
outgoing-port-
channel
number
Enter the keywords
outgoing-port-channel
then the
number of the port channel to display flow information.
• For a Port Channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 128.
incoming-
interface
interface
Enter the keywords
incoming-interface
then the interface
type and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a Gigabit Ethernet interface, enter the keyword
gigabitethernet
then the slot/port information.
• For a port extender (PE) Gigabit Ethernet interface, enter
the keyword
peGigE
then the peid/stack-unit/port-pipe id
information.
NOTE: The peGigE option is available only when the
extended bridge feature is enabled.
source-ip address Enter the keywords
source-ip
then the IP source address in IP
address format.
destination-ip
address
Enter the keywords
destination-ip
then the IP destination
address in IP address format.
Interfaces 1029