Dell C9000 series, Reference Manual

Page: 2259 / 2286

Version Description
8.3.2.0 Introduced on the E-Series TeraScale.
Usage Information If no options are specified, debug is active on all interfaces and all VRRP groups.
show vrrp ipv6
View the IPv6 VRRP groups that are active. If no VRRP groups are active, the Dell Networking OS returns
No
Active VRRP group
.
C9000 Series
Syntax
show vrrp ipv6 [ vrid ] [ interface ] [brief][vrf vrf-name ]
Parameters
vrid (OPTIONAL) Enter the virtual router identifier for the VRRP group
to view only that group. The range is from 1 to 255.
interface Enter the following keywords and slot/port or number
information:
• For a Port Channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a VLAN interface, enter the keyword
vlan
then the
VLAN ID. The VLAN ID range is from 1 to 4094.
brief (OPTIONAL) Enter the keyword
brief
to view a table of
information on the VRRP groups.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to view
IPv6 VRRP groups corresponding to that VRF.
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Virtual Router Redundancy Protocol (VRRP) 2259