Dell C9000 series, Reference Manual

Page: 510 / 2286

Version Description
7.7.1.0 Introduced on the C-Series.
Usage Information To view the total number of COMMUNITY attributes found, use the
show ip bgp
summary
command. The text line above the route table states the number of
COMMUNITY attributes found.
The
show ip bgp community
command without any parameters lists BGP routes
with at least one BGP community attribute and the output is the same as for the
show
ip bgp
command output.
The following describes the
show ip bgp community
command shown in the
following example.
Field Description
Network Displays the destination network prefix of each BGP route.
Next Hop Displays the next hop address of the BGP router. If 0.0.0.0 is
listed in this column, then local routes exist in the routing table.
Metric Displays the BGP route’s metric, if assigned.
LocPrf Displays the BGP LOCAL_PREF attribute for the route.
Weight Displays the route’s weight.
Path Lists all the ASs the route passed through to reach the
destination network.
Example
Dell#show ip bgp community ?
local-AS Do not export outside local AS (well-
known community)
no-advertise Do not advertise to any peer (well-known
community)
no-export Do not export to next AS (well-known
community)
aa:nn Community number in aa:nn format
| Pipe through a command
Dell#show ip bgp community
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
BGP local router ID is 192.168.11.5
Status codes: s suppressed, S stale, d dampened, h history, *
valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r
- redistributed
n - network, D - denied, S - stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf
Weight Path
*> 55.0.0.0/24 172.16.0.2
0 200 i
*> 66.0.0.0/24 172.16.0.2
0 200 i
Dell#show ip bgp community no-advertise
Border Gateway Protocol 510