Dell C9000 series, Reference Manual

Page: 835 / 2286

Usage Information Allocate at least one FP block to
ipmacacl
before you can enable IP+MAC Source
Address Validation.
1 Use the
cam-acl l2acl
command from CONFIGURATION mode.
2 Save the running-config to the startup-config.
3 Reload the system.
show ip dhcp binding
Display the DHCP binding table.
C9000 Series
Syntax
show ip dhcp binding
Defaults none
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
Example
Dell# show ip dhcp binding
IP address Hardware address Lease expiration Type
1.1.1.253 00:00:00:00:00:10 Jan 08 2014 23:57 Automatic
1.1.1.254 00:00:00:00:00:20 Jan 08 2014 23:57 Automatic
Dynamic Host Configuration Protocol (DHCP) 835