Dell C9000 series, Reference Manual

Page: 2137 / 2286

Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
Usage Information You are guided through a series of queries to configure SupportAssist. The generated
commands are added to the running configuration, including the DNS resolve
commands, if configured.
This command starts the configuration wizard for the SupportAssist. At any time, you
can exit by entering Ctrl-C. If necessary, you can skip some data entry.
support-assist activity
Trigger an activity event immediately.
Syntax
support-assist activity { full-transfer } start now
Parameters
full-transfer Enter the keywords
full-transfer
to specify transfer of
configuration, inventory, logs, and other information.
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
SupportAssist Commands
Dell Networking OS supports the following SupportAssist mode commands.
SupportAssist 2137