Dell C9000 series, Reference Manual

Page: 696 / 2286

Te 10/0 P2 0 0 0
Te 10/0 P3 0 0 0
Te 10/0 P4 0 0 0
Te 10/0 P5 0 0 0
Te 10/0 P6 0 0 0
Te 10/0 P7 0 0 0
Interface TenGigabitEthernet 10/1
Interface Priority Rx XOFF Frames Rx Total Frames Tx Total Frames
------------------------------------------------------------------------
Te 10/1 P0 0 0 0
Te 10/1 P1 0 0 0
Te 10/1 P2 0 0 0
Te 10/1 P3 0 0 0
Te 10/1 P4 0 0 0
Te 10/1 P5 0 0 0
Te 10/1 P6 0 0 0
Te 10/1 P7 0 0 0
ETS Commands
The following ETS commands are supported on the Dell Networking OS.
dcb-enable
Enable data center bridging.
C9000 Series
Syntax
dcb enable[ pfc-queues 1|4 ]
To disable DCB, use the
no dcb enable
command.
Parameters
pfc-queues Enter the pfc-queue range. To disable DCB, use the no dcb
enable command. The range is from 1 or 2.
Defaults None
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
Version
The following is a list of the Dell Networking OS version history for this command.
Data Center Bridging (DCB) 696