Command History
Version
Description
9.9(0.0)
Introduced on the C9010.
9.2(1.0)
Introduced on the Z9500.
8.2.1.0
Introduced on the E-Series ExaScale.
7.4.1.0
Introduced
Usage Information Loopback interfaces are up constantly and the BGP session may need one interface
constantly up to stabilize the session. The
neighbor update-source
command is
not necessary for directly connected internal BGP sessions.
neighbor weight
Assign a weight to the neighbor connection, which is used to determine the best path.
C9000 Series
Syntax
neighbor {
ipv6-address
|
peer-group-name
} weight
weight
To remove a weight value, use the
no neighbor {
ipv6-address
|
peer-group-
name
} weight
weight
command.
Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
NOTE:
The :: notation specifies successive hexadecimal
fields of zeros.
peer-group-name
Enter the name of the peer group to disable all routers within
the peer group.
weight
Enter a number as the weight. The range is 0 to 65535. The
default is
0
.
Defaults
0
Command Modes
ROUTER BGP
Command History
Version
Description
9.9(0.0)
Introduced on the C9010.
9.2(1.0)
Introduced on the Z9500.
8.2.1.0
Introduced on the E-Series ExaScale.
7.4.1.0
Introduced
Border Gateway Protocol
618
Summary of Contents for C9000 series
Page 1: ...Dell Networking Command Line Reference Guide for the C9000 Series Version 9 10 0 0 ...
Page 394: ...deny 14551 666 Dell Access Control Lists ACL 394 ...
Page 877: ...algorithm FIPS Cryptography 877 ...
Page 1297: ...Total 5 0 Total 5 active route s using 952 bytes IPv6 Basics 1297 ...
