Dell C9000 series, Reference Manual

Page: 622 / 2286

Parameters
connected Enter the keyword
connected
to redistribute routes from
physically connected interfaces.
static Enter the keyword
static
to redistribute manually configured
routes. These routes are treated as incomplete routes.
route-map map-
name
(OPTIONAL) Enter the keywords
route-map
followed by the
name of an established route map. Only the following ROUTE-
MAP mode commands are supported:
• match ipv6 address
• match ipv6 next-hop
• match ipv6 route-source
• set ipv6 next-hop
If the route map is not configured, the default is
deny
(to drop
all routes).
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
7.4.1.0 Introduced
Usage Information If you do not configure the
default-metric
command in addition to the
redistribute
command, or there is no route map to set the metric, the metric for
redistributed static and connected is “0”.
To redistribute the default route (0::0/0), configure the
neighbor default-
originate
command.
Related
Commands neighbor default-originate – injects the default route.
redistribute ospf
Redistribute OSPFv3 routes into BGP.
C9000 Series
Syntax
redistribute ospf process-id [[match external {1 | 2}] [match
internal]] [route-map map-name ]
Border Gateway Protocol 622