Dell C9000 series, Reference Manual

Page: 1671 / 2286

Version Description
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the S-Series.
Usage Information This command re-applies the RP mapping logic for all the groups learnt by the node.
Any stale information corresponding to the existing mapping configuration is updated.
As a result, the existing BSR cache and the *,G's are deleted only if these entries are
stale.
clear ip pim tib
Clear PIM tree information from the PIM database.
C9000 Series
Syntax
clear ip pim tib [ group ]
Parameters
group (OPTIONAL) Enter the multicast group address in dotted decimal
format (A.B.C.D).
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the S-Series.
Usage Information If you use this command on a local VLT node, all multicast routes from the local PIM
TIB, the entire multicast route table, and all the entries in the data plane are deleted.
The local VLT node sends a request to the peer VLT node to download multicast routes
learned by the peer. Both local and synced routes are removed from the local VLT node
multicast route table. The peer VLT node clears synced routes from the node.
PIM-Sparse Mode (PIM-SM) 1671