Dell C9000 series, Reference Manual

Page: 1218 / 2286

show ip flow
Show how a Layer 3 packet is forwarded when it arrives at a particular interface.
C9000 Series
Syntax
show ip flow interface interface {source-ip address destination-ip
address } {protocol number [tcp | udp]} {src-port number
destination-port number }
Parameters
interface interface Enter the keyword interface then one of the following interface
keywords.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
source-ip address Enter the keywords
source-ip
then the IP source address in IP
address format.
destination-ip
address
Enter the keywords
destination-ip
then the IP destination
address in IP address format.
protocol number
[tcp | udp]
Enter the keyword
protocol
then one of the protocol type
keywords:
tcp
,
udp
, or
protocol number
The protocol
number range is from 0 to 255. .
src-port number Enter the keywords src-port then the source port number.
destination-port
number
Enter the keywords
destination-port
then the destination
port number.
Command Modes EXEC
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
IPv4 Routing 1218