Dell C9000 series, Reference Manual

Page: 344 / 2286

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Added the
monitor
option.
6.1.1.0 Introduced on the E-Series.
Usage Information When you use the
log
option, the CP processor logs detail the packets that match.
Depending on how many packets match the log entry and at what rate, the CP may
become busy as it has to log these packet details.
By default, 10 ACL logs are generated if you do not specify the threshold explicitly. The
default frequency at which ACL logs are generated is five minutes. By default, flow-
based monitoring is not enabled.
Use the
monitor
option only when you are using flow-based monitoring. For more
information, refer to the Port Monitoring chapter in the C9000 Series Configuration
Guide .
NOTE: When ACL logging and byte counters are configured simultaneously, byte
counters may display an incorrect value. Configure packet counters with logging
instead.
Related
Commands
permit — configures a MAC address filter to pass packets.
seq — configures a MAC address filter with a specified sequence number.
mac access-list extended
Configure an extended MAC access control list (extended MAC ACL).
C9000 Series
Syntax
mac access-list extended access-list-name [cpu-qos]
To delete a MAC access list, use the
no mac access-list extended access-
list-name [cpu-qos]
command.
Access Control Lists (ACL) 344