Dell C9000 series, Reference Manual

Page: 672 / 2286

show ip protocol-queue-mapping
Display the CPU queue mapping for IPv4 protocols.
C9000 Series
Syntax
show ip protocol-queue-mapping queue-id
Defaults Not configured.
Command Modes EXEC Privilege
Usage Information The
show
output displays information on CPU traffic flows for IPv4 protocols, including
the ingress queue at which the traffic is queued and the CPU to which protocol traffic is
sent with the applied rate limits (configured or default) in kilobits per second (kbps). The
egress port queues on CPUs are abbreviated as: RP (Route Processor), CP (Control
Processor), and LC (line card).
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Example
Dell#show ip protocol-queue-mapping
Protocol Src-Port Dst-Port TcpFlag Queue EgPort
Rate (kbps)
-------- -------- -------- ------- ----- ------
-----------
TCP (BGP) any/179 179/any _ Q13 RP
2500
UDP (DHCP) 67/68 68/67 _ Q6 CP
1200
UDP (DHCP-R) 67 67 _ Q6 CP
1200
TCP (FTP) any 21 _ Q3 CP
400
ICMP any any _ Q5 CP
300
IGMP any any _ Q12 RP
Control Plane Policing (CoPP) 672