manualshive.com logo in svg

Dell C9000 series, Reference Manual

Share
Download
Dell C9000 series Reference Manual Download Page 2254

vrrp-group

Assign a VRRP ID to an interface. You can configure up to 255 VRRP groups per interface.

C9000 Series

Syntax

vrrp-group 

vrrp-id

Parameters

vrrp-id

Enter a number as the group ID. The range is from 1 to 255.

Defaults

Not configured.

Command Modes

INTERFACE

Command History This guide is platform-specific. For command information about other platforms, see 

the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.9(0.0)

Introduced on the C9010.

9.2(1.0)

Introduced on the Z9500.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

7.6.1.0

Introduced on the S-Series.

7.5.1.0

Introduced on the C-Series.

6.2.1.1

Introduced on the E-Series.

Usage Information The VRRP group only becomes active and sends VRRP packets when a virtual IP 

address is configured. When you delete the virtual address, the VRRP group stops 
sending VRRP packets.

Related Command

virtual-address

 — assigns up to 12 virtual IP addresses per VRRP group.

Virtual Router Redundancy Protocol (VRRP)

2254

Summary of Contents for C9000 series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands