Dell C9000 series Reference Manual Download Page 870

Page: 870 / 2286

FIPS Cryptography

To configure federal information processing standards (FIPS) cryptography, use the commands described in
this chapter.

Topics:

•

•

•

•

fips mode enable

Enable the FIPS cryptography mode on the platform.

C9000 Series

Syntax

[no] fips mode enable

To disable the FIPS cryptography mode, use the

no fips mode enable

command.

Default

Disabled

Command Modes

CONFIGURATION

Example

Dell(conf)#fips mode enable

WARNING: Enabling FIPS mode will close all SSH/Telnet connection,

restart those servers, and destroy all configured host keys.

proceed (y/n) ? y

Dell(conf)#

Command History This guide is platform-specific. For command information about other platforms, refer

to the relevant

Dell Networking OS Command Line Reference Guide

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.9(0.0)

Introduced on the C9010.

9.5(0.1)

Introduced on the Z9500.

FIPS Cryptography

870

Summary of Contents for C9000 series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C9000 series

Reviews:

Brands by name

Popular brands

Dell C9000 series, Reference Manual

Search results

Summary of Contents for C9000 series

Reviews:

Brands by name

Popular brands