Dell C9000 series, Reference Manual

Page: 1336 / 2286

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information When you use the
no tagged
command, the interface is automatically placed in the
Default VLAN as an untagged interface unless the interface is a member of another
VLAN. If the interface belongs to several VLANs, remove it from all VLANs to change it
to an untagged interface.
Tagged interfaces can belong to multiple VLANs, while untagged interfaces can only
belong to one VLAN at a time.
Related
Commands
interface vlan — configures a VLAN.
untagged — specifies which interfaces in a VLAN are untagged.
track ip
Track the Layer 3 operational state of a Layer 3 VLAN, using a subset of the VLAN member interfaces.
C9000 Series
Syntax
track ip interface
To remove the tracking feature from the VLAN, use the
no track ip interface
command.
Parameters
interface Enter the following keywords and slot/port or number
information:
• For a Port Channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
Layer 2 1336