Dell C9000 series, Reference Manual

Page: 403 / 2286

Version Description
9.2(1.0) Introduced on the Z9500.
9.2.(0.0) Introduced on Z9000, S4810, and S4820T.
8.2.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Related
Commands show bfd neighbors – displays the BFD neighbor information on all interfaces or a
specified interface.
ipv6 ospf bfd all-neighbors
Establish BFD sessions with all OSPFv3 neighbors on a single interface or use non-default BFD session
parameters.
C9000 Series
Syntax
ipv6 ospf bfd all-neighbors [disable | [interval interval min_rx
min_rx multiplier value role {active | passive}]]
To disable all BFD sessions on an OSPFv3 interface implicitly, use the
no ipv6 ospf
bfd all-neighbors disable
command in interface mode..
Parameters
disable (OPTIONAL) Enter the keyword
disable
to disable BFD on this
interface.
interval
milliseconds
(OPTIONAL) Enter the keyword
interval
to specify non-
default BFD session parameters beginning with the transmission
interval. The range is from 50 to 1000. The default is
200 .
min_rx
milliseconds
Enter the keywords
min_rx
to specify the minimum rate at
which the local system receives control packets from the
remote system. The range is from 50 to 1000. The default is
200 .
multiplier value Enter the keyword
multiplier
to specify the number of
packets that must be missed in order to declare a session down.
The range is from 3 to 50. The default is
3 .
role [active |
passive] Enter the role that the local system assumes:
•
Active
— The active system initiates the BFD session.
Both systems can be active for the same session.
Bidirectional Forwarding Detection (BFD) 403