Dell C9000 series, Reference Manual

Page: 1140 / 2286

show ip igmp interface
View information on the interfaces participating in IGMP.
C9000 Series
Syntax
show ip igmp interface [ interface ]
Parameters
interface (OPTIONAL) Enter the interface type and slot/port information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a Loopback interface, enter the keyword
loopback
then a number from 0 to 16383.
• For a port channel interface, enter the keywords
port-
channel
then a number.
• For a VLAN interface, enter the keyword
vlan
then a
number from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command.
Usage Information IGMP commands accept only non-VLAN interfaces — specifying VLAN does not yield
results.
Internet Group Management Protocol (IGMP) 1140