Dell C9000 series, Reference Manual

Page: 338 / 2286

seq Sequence numbers
show Show Standard ACL configuration
permit
To forward packets from a specific source MAC address, configure a filter.
C9000 Series
Syntax
permit {any | mac-source-address [ mac-source-address-mask ]} [count
[byte]] | [log [interval minutes ] [threshold-in-msgs [count]]
[monitor]
To remove this filter, you have two choices:
• Use the
no seq sequence-number
command if you know the filter’s sequence
number.
• Use the
no permit {any | mac-source-address mac-source-address-
mask }
command.
Parameters
any Enter the keyword
any
to forward all packets received with a
MAC address.
mac-source-
address Enter a MAC address in nn:nn:nn:nn:nn:nn format.
mac-source-
address-mask (OPTIONAL) Specify which bits in the MAC address must match.
If no mask is specified, a mask of 00:00:00:00:00:00 is applied
(in other words, the filter allows only MAC addresses that
match).
count (OPTIONAL) Enter the keyword
count
to count packets
processed by the filter.
byte (OPTIONAL) Enter the keyword
byte
to count bytes processed
by the filter.
log (OPTIONAL) Enter the keyword
log
to include ACL messages in
the log.
threshold-in msgs
count
(OPTIONAL) Enter the
threshold-in-msgs
keyword followed
by a value to indicate the maximum number of ACL logs that
can be generated, exceeding which the generation of ACL logs
is terminated with the
seq
,
permit
, or
deny
commands. The
threshold range is from 1 to 100.
interval minutes (OPTIONAL) Enter the keyword
interval
followed by the time
period in minutes at which ACL logs must be generated. The
threshold range is from 1 to 10 minutes.
monitor (OPTIONAL) Enter the keyword
monitor
when the rule is
describing the traffic that you want to monitor and the ACL in
Access Control Lists (ACL) 338