Dell C9000 series, Reference Manual

Page: 2268 / 2286

Parameters
route-import Enter the keyword route-import to import routes into the VRF.
tag Enter a tag (ASN number) to specify an import route target for
importing routes from another VRF.
To import leaked routes from another VRF, you must use the
same ASN number that is specified as the export route target at
the source VRF.
route-map-name Enter the name of the route-map to filter the imported routes.
NOTE: You must use the route-map attribute while
importing routes from the global RTM. Route-maps
enable you to filter routes at the import end based on
the matching criteria that you define in the route-map.
Defaults Not configured.
Command Modes
• CONFIGURATION
• VRF MODE
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON,
and Z9500.
Usage Information You can configure multiple import conditions per VRF depending on the exporting VRF.
The export-target and import-target support only the match protocol and match
prefix-list options, all other options configured in the route-map are ignored.
Related
Commands ip route-export – exports routes to another VRF.
Virtual Routing and Forwarding (VRF) 2268