Dell C9000 series, Reference Manual

Page: 1702 / 2286

ip redirect-list
Configure a redirect list and enter REDIRECT-LIST mode.
C9000 Series
Syntax
ip redirect-list redirect-list-name ]
To remove a redirect list, use the
no ip redirect-list
command.
Parameters
redirect-list-name Enter a description to identify the IP redirect list (16 characters
maximum)
Defaults None
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
8.4.2.1 Introduced on the C-Series and S-Series.
8.4.2.0 Introduced on the E-Series TeraScale.
7.7.1.0 Introduced on the E-Series ExaScale.
Policy-based Routing (PBR) 1702