All the show and debugs commands display the link band width extended-community
prefixed with DMZ-Link-bw along with other extended communities.
Dell#show ip bgp 3.3.3.0/24
BGP routing table entry for 3.3.3.0/24
Paths: (1 available, table Default-IP-Routing-Table.)
Not advertised to any peer
Received from :
1.1.1.2 (3.3.3.1) Best
AS_PATH :
Next-Hop : 1.1.1.2, Cost : 0
Origin IGP, Metric 0, LocalPref 100, Weight 0, internal
Extended Communities :
DMZ-Link Bw: 2000 kbytes*
Related
Commands
— controls the number of network prefixes received.
show ip bgp cluster-list
View BGP neighbors in a specific cluster.
C9000 Series
Syntax
show ip bgp [vrf
vrf-name
] [ipv4 {
multicast
|
unicast
} | ipv6
unicast
] cluster-list [
cluster-id
]
Parameters
vrf
vrf-name
(OPTIONAL) Enter the keyword
vrf
and then the name of the
VRF to view cluster information of BGP neighbors
corresponding to that VRF.
ipv4
multicast
(OPTIONAL) Enter the keywords
ipv4
followed by the keyword
multicast
to view information related only to ipv4 multicast
routes.
ipv4 unicast
(OPTIONAL) Enter the keyword
ipv4
followed by the keyword
unicast
to view information related only to ipv4 multicast
routes.
ipv6
unicast
(OPTIONAL) Enter the keyword
ipv6
followed by the keyword
unicast
to view information related to only to the ipv6 unicast
routes.
cluster-id
(OPTIONAL) Enter the cluster id in dotted decimal format. The
range is 1 — 4294967295.
Command Modes
• EXEC
• EXEC Privilege
Border Gateway Protocol
506
Summary of Contents for C9000 series
Page 1: ...Dell Networking Command Line Reference Guide for the C9000 Series Version 9 10 0 0 ...
Page 394: ...deny 14551 666 Dell Access Control Lists ACL 394 ...
Page 877: ...algorithm FIPS Cryptography 877 ...
Page 1297: ...Total 5 0 Total 5 active route s using 952 bytes IPv6 Basics 1297 ...