Dell C9000 series, Reference Manual

Page: 475 / 2286

Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Related
Commands bgp four-octet-as-support — enables 4-byte support for the BGP process.
neighbor maximum-prefix
Control the number of network prefixes received.
C9000 Series
Syntax
neighbor { ip-address | peer-group-name } maximum-prefix maximum
[ threshold ] [warning-only]
To return to the default values, use the
no neighbor { ip-address | peer-
group-name } maximum-prefix maximum
command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format.
peer-group-name Enter the name of the peer group.
maximum Enter a number as the maximum number of prefixes allowed for
this BGP router. The range is from 1 to 4294967295.
threshold (OPTIONAL) Enter a number to be used as a percentage of the
maximum value. When the number of prefixes reaches this
percentage of the maximum value, the E-Series software sends
a message. The range is from 1 to 100 percent. The default is
75 .
warning-only (OPTIONAL) Enter the keyword
warning-only
to set the router
to send a log message when the maximum value is reached. If
this parameter is not set, the router stops peering when the
maximum number of prefixes is reached.
Defaults threshold = 75
Command Modes ROUTER BGP
Border Gateway Protocol 475