manualshive.com logo in svg

Dell C9000 series, Reference Manual

Share
Download
Dell C9000 series Reference Manual Download Page 1571

Command History This guide is platform-specific. For command information about other platforms, see 

the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.9(0.0)

Introduced on the C9010.

clear ipv6 ospf process

Reset an OSPFv3 router process without removing or re-configuring the process.

C9000 Series

Syntax

clear ipv6 ospf [vrf 

vrf-name

] process

Parameters

vrf 

vrf-name

(Optional) Enter the keyword vrf and the name of the VRF to 
clear IPv6 routes corresponding to that VRF.

Command Modes

• EXEC
• EXEC Privilege

Command History This guide is platform-specific. For command information about other platforms, see 

the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.9(0.0)

Introduced on the C9010.

9.8(0.0)

Introduced on the S3048-ON and S4048-ON.

9.7(0.0)

Added support for VRF on all platforms ( Except MXL and 
STOMP ).

9.1.(0.0)

Introduced on the S4810 and Z9000.

8.3.19.0

Introduced on the S4820T.

7.8.1.0

Added support for C-Series.

7.4.1.0

Introduced on the E-Series.

Open Shortest Path First (OSPFv2 and OSPFv3)

1571

Summary of Contents for C9000 series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands