Dell C9000 series, Reference Manual

Page: 1148 / 2286

Version Description
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Seris and S-Series.
7.7.1.0 Introduced on the E-Series.
Usage Information On the C-Series and S-Series, unregistered multicast data traffic drops when you
disable flooding; they do not forward the packets to multicast router ports. On the C-
Series and S-Series, in order to disable Layer 2 multicast flooding, disable Layer 3
multicast (
no ip multicast-routing
).
Use this command in Configuration Terminal Batch mode to control the flooding
behavior in a dual-homing setup.
ip igmp snooping last-member-query-interval
The last member query interval is the maximum response time inserted into Group-Specific queries sent in
response to Group-Leave messages.
C9000 Series
Syntax
ip igmp snooping last-member-query-interval milliseconds
To return to the default value, use the
no ip igmp snooping last-member-
query-interval
command.
Parameters
milliseconds Enter the interval in milliseconds. The range is from 100 to
65535. The default is
1000 milliseconds .
Defaults 1000 milliseconds
Command Modes
INTERFACE
INTERFACE (BATCH Mode)
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
Internet Group Management Protocol (IGMP) 1148