Dell C9000 series, Reference Manual

Page: 1170 / 2286

Defaults 5
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced.
Usage Information Retries are 20 seconds apart.
Related
Commands show arp retries — displays the configured number of ARP retries.
arp timeout
Set the time interval for an ARP entry to remain in the ARP cache.
C9000 Series
Syntax
arp timeout minutes
Parameters
minutes Enter the number of minutes. The range is from 0 to 35790. The
default is
4 hours (240 minutes) .
Defaults 240 minutes (4 hours)
Command Modes
• INTERFACE
• INTERFACE PORT EXTENDER (conf-if-pegi-
pe-id / stack-unit / port-id)
• INTERFACE (BATCH MODE)
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
IPv4 Routing 1170