Dell C9000 series, Reference Manual

Page: 455 / 2286

peer-group-name (OPTIONAL) Enter the name of the peer group to disable or
enable all routers within the peer group..
Defaults Disabled
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048–ON and S4048–ON.
9.7(0.0) Added support for VRF.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.2.1.0 Introduced.
Usage Information This command turns on BGP soft-reconfiguration inbound debugging. If no neighbor is
specified, debug turns on for all neighbors.
debug ip bgp updates
View information about BGP updates.
C9000 Series
Syntax
debug ip bgp [vrf vrf-name ] [ A.B.C.D | X:X:X:X::X | peer-group
peer-group-name ] updates [in | out | prefix-list prefix-list-name]
To disable debugging, use the
no debug ip bgp [vrf vrf-name ] [ A.B.C.D |
X:X:X:X::X | peer-group peer-group-name ] updates [in | out |
prefix-list prefix-list-name]
command.
Border Gateway Protocol 455