peer-group-name
Enter the name of the peer group to apply the filter to all routers
in the peer group.
as-path-name
Enter the name of an established AS-PATH access list. If you do
not configure the AS-PATH access list, the default is
permit
(to
allow routes). The maximum is 16 characters.
in
Enter the keyword
in
to filter inbound BGP routes.
out
Enter the keyword
out
to filter outbound BGP routes.
Defaults
Not configured.
Command Modes
ROUTER BGPV6-ADDRESS FAMILY
Command History
Version
Description
9.9(0.0)
Introduced on the C9010.
9.2(1.0)
Introduced on the Z9500.
8.2.1.0
Introduced on the E-Series ExaScale.
7.4.1.0
Introduced
neighbor maximum-prefix
Control the number of network prefixes received.
C9000 Series
Syntax
neighbor {
ipv6-address
|
peer-group-name
} maximum-prefix
maximum
[
threshold
] [warning-only]
To return to the default values, use the
no neighbor {
ipv6-address
|
peer-
group-name
} maximum-prefix
maximum
[
threshold
] [warning-only]
command.
Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
NOTE:
The :: notation specifies successive hexadecimal
fields of zeros.
peer-group-name
Enter the name of the peer group.
maximum
Enter a number as the maximum number of prefixes allowed for
this BGP router. The range is 1 to 4294967295.
threshold
(OPTIONAL) Enter a number to be used as a percentage of the
maximum value. When the number of prefixes reaches this
Border Gateway Protocol
604
Summary of Contents for C9000 series
Page 1: ...Dell Networking Command Line Reference Guide for the C9000 Series Version 9 10 0 0 ...
Page 394: ...deny 14551 666 Dell Access Control Lists ACL 394 ...
Page 877: ...algorithm FIPS Cryptography 877 ...
Page 1297: ...Total 5 0 Total 5 active route s using 952 bytes IPv6 Basics 1297 ...